Recloser Placement on Distribution System Reliability at PT. PLN (Persero) City of Subulussalam Aceh

Faisal Irsan Pasaribu; Boonyang Plangklang; Mohd Zamri Bin Hasan

doi:10.20122/etaps.v1i2.3222

Authors

Faisal Irsan Pasaribu Universitas Muhammadiyah Sumatera Utara
Boonyang Plangklang Rajamangala University of Technology
Mohd Zamri Bin Hasan Universiti Malaysia Perlis

DOI:

https://doi.org/10.20122/etaps.v1i2.3222

Keywords:

Recloser, SAIFI, SAIDI, Distribution System

Abstract

Security of the electric power distribution system is one element of service fulfillment. The automatic return breaker or recloser is one of the 20 kV Medium Voltage Air Line safety equipment which functions to anticipate momentary disturbances so that power outages can be anticipated, the current use of electricity has expanded to almost all regions. The 20 kV distribution network often experiences disturbances both externally and internally. External disturbances are in the form of surges caused by lightning, tree branches or twigs that are exposed to the transmission line, while internal disturbances are caused by circuit breakers due to the opening and closing of circuit breakers. Interference can be temporary or permanent. Temporary interference will disappear by itself, while permanent interference requires the operator to neutralize the interference. Based on the results of the analysis of recloser placement in the distribution channel at PT. PLN (Persero) Subulussalan PK Calendar can be calculated in comparison using SAIDI, SAIFI, and FITNES. The results obtained after calculating the placement of the recloser in the front transformer position of the Koramil Sp Left with SAIDI values (0.287), and SAIFI (0.000517) and FITNES values (746268.657).

Author Biographies

Faisal Irsan Pasaribu, Universitas Muhammadiyah Sumatera Utara

Department of Electrical Engineering

Boonyang Plangklang, Rajamangala University of Technology

Department of Electrical Engineering

Mohd Zamri Bin Hasan, Universiti Malaysia Perlis

Department of Electrical Engineering

References

Adam, M., & Zurairah, M. (2021, August). DESIGN OF CLASSROOM TEMPERATURE CONTROLLER AT MUHAMMADIYAH UNIVERSITY, SUMATRA UTARA. In UISU National Engineering Seminar (SEMNASTEK) (Vol. 4, No. 1, pp. 80-89).

Adam, M., Harahap, P., Oktrialdi, B., & Herlambang, R. (2021). Analysis of Starting Induction Motor Using Softstarter and Inverter. Jurnal MESIL (ElectroCivil Machinery)/Journal MESIL (Machine Electro Civil), 2(2), 81-87.

Adam, M. (2015). Service Marketing Management: theory and application.

Adam, M. (2020). The influence of the cutting conditions of the s45c steel milling process on the temperature of the tool, chip, and workpiece. THESIS-2020.

Adam, M., & Zurairah, M. (2021, August). DESIGN OF CLASSROOM TEMPERATURE CONTROLLER AT MUHAMMADIYAH UNIVERSITY, SUMATRA UTARA. In UISU National Engineering Seminar (SEMNASTEK) (Vol. 4, No. 1, pp. 80-89).

Adam, M., Harahap, P., Oktrialdi, B., & Herlambang, R. (2021). Analysis of Starting Induction Motor Using Softstarter and Inverter. Jurnal MESIL (ElectroCivil Machinery)/Journal MESIL (Machine Electro Civil), 2(2), 81-87.

Adam, M. (2015). Service Marketing Management: theory and application.

Adam, M. (2020). The influence of the cutting conditions of the s45c steel milling process on the temperature of the tool, chip, and workpiece. THESIS-2020.

Asmara, I. P. S., & Adam, M. (2021, August). Seakeeping and resistance analysis of 1200 GT passenger ships fitted with NACA 4412 stern foil using the CFD method. In IOP Conference Series: Materials Science and Engineering (Vol. 1175, No. 1, p. 012002). IOP Publishing.

Evalina, N., Pasaribu, F. I., & Azis, A. (2021). The Use of Inverters in Solar Power Plants for Alternating Current Loads. Britain International of Exact Sciences (BIoEx) Journal, 3(3), 151-158.

Evalina, N., Azis, A., Pasaribu, F. I., & Arfis, A. (2021, November). Application of Solar Power Generation on Disinfectant Spraying Robots. In Proceedings of the National Seminar on Entrepreneurship (Vol. 2, No. 1, pp. 368-374).

Evalina, N., Pasaribu, F. I., & Efrida, R. (2021). Assistance in Making Souvenirs from Resin Materials at the Putri Aisyiyah Orphanage, Medan City Branch. Journal of Community Service, 4(2).

Evalina, N., Abduh, R., & Arfis, A. (2019, October). Making Keychains from Resin Materials in Jaharun Village A. In Proceedings of the National Seminar on Entrepreneurship (Vol. 1, No. 1, pp. 251-256).

Gomesh, N., Daut, I., Kumaran, V., Irwanto, M., Irwan, Y. M., & Fitra, M. (2013). Photovoltaic powered T-shirt folding machine. Energy Procedia, 36, 313-322.

Harahap, U., & Pasaribu, F. I. (2016). Valve Open and Close Control System in Jacket Water Heating Process (Doctoral dissertation, University of Medan Area).

Harahap, P., & Adam, M. (2021). Electric Power Efficiency In Dispensers With Different Types Of Brands Using Inverators. RESISTOR (Computer Power Telecommunications Control Electronics), 4(1), 37-42.

Harahap, P. H. P., & Al-Ani, W. K. A. (2021). The Effect of Charcoal on the Improvement of Grounding Resistance as a Soil Treatment in Reducing Grounding Resistance. Journal of Renewable Energy, Electrical, and Computer Engineering, 1(1), 12-15.

Harahap, P., & Oktrialdi, B. (2020, April). Harmonics in defibrillator equipment (DC Shock) using simulink Matlab. In IOP Conference Series: Materials Science and Engineering (Vol. 821, No. 1, p. 012025). IOP Publishing.

Harahap, P., Nofri, I., & Lubis, S. (2021). PLTS 200 Wp to Meet Energy Needs at the Taqwa Muhammadiyah Mosque, Sei Litur Village, Sawit Sebrang Langkat District. Journal of Innovation and Community Engagement, 1(1), 60-71.

Harahap, P. (2018, June). HARMONICS REDUCTION IN 100 mA MOBILE X-RAY EQUIPMENT. In SEMNASTEK UISU 2018.